LANY01220
Double Leg, Shock Absorbing Lanyard
Sizing : 1750mm
Hooks : Double Scaffolding Hooks
Description :
This is a double leg, shock absorbing lanyard with 2 scaffolding hooks and a single leg snap hook connector that is engineered to attach to a dorsal D-Ring on a stand-alone, fall arrest harness.
This lanyard is recommended for those who are required to navigate obstacles whilst working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point.
The built in shock absorber is engineered to reduce the total force experienced in a fall to a survivable force of less than 6kN.
This lanyard is recommended for those who are required to navigate obstacles whilst working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point.
The built in shock absorber is engineered to reduce the total force experienced in a fall to a survivable force of less than 6kN.
Spec sheets and accreditations available upon request.
Specifications
| WEBBING: | 45 mm UV-resistant polyester webbing with a minimum breaking load of 2,6 tonnes |
| LANYARD LENGTH: | 1750mm when shock absorber is intact 3450mm when shock absorber fully deployed |
| HOOKS: | Corrosion-resistant steel hooks: - Scaffolding hooks: 50mm gate opening with a min. breaking strength of 23kN. - Snap hooks: 20mm gate opening with a min. breaking strength of 22kN. |
| MAX FALL WEIGHT: | 140kg |
SANS 50354 | EN 354
SANS 50355 | EN 355
EN362
SANS 50355 | EN 355
EN362
Related Products
