20013
Hiker
Advanced comfort safety boot
Sizes: 3 – 13
Available In: Black, Walnut
Extras:
Spec sheets and accreditations available upon request.
Specifications
Upper
Cut from 2.0 – 2.2mm Full Grain Buffalo Sides
Increased girth area as per podiatry specifications
Padded tongue is from a closed cell foam
The padded collar is from a soft 15mm closed cell foam
4 pair D-Ring lace-up and hooks with corrosion-resistant gunmetal coating
Increased girth area as per podiatry specifications
Padded tongue is from a closed cell foam
The padded collar is from a soft 15mm closed cell foam
4 pair D-Ring lace-up and hooks with corrosion-resistant gunmetal coating
Lining
The quarter lining is from an industrial ferrabelle non-woven material
The vamp lining is form a hi-tech needle-fibre blend with excellent perspiration absorbency and treated with *Ultra-Fresh to impart hygienic and anti-bacterial properties to the material
The vamp lining is form a hi-tech needle-fibre blend with excellent perspiration absorbency and treated with *Ultra-Fresh to impart hygienic and anti-bacterial properties to the material
In Sock
The in-sock is from an anti-static non-woven material that is bonded to a layer of EVA and contains Poron inserts at
the heel and ball of the foot for enhanced comfort and support
The Energiser Poron / EVA top sock is from a combination of polyester and wool, with excellent perspiration absorbency, and bonded to a layer of EVA
The Poron inserts at the ball and heel of the top sock offer optimum support where it is needed most, ensuring dynamic impact compression and a gentle rebound with every step
The top sock responds to weight and temperature, moulding itself to the foot, resulting in fewer aches and pain
The top sock has been treated with *Ultra-Fresh to impart hygienic and anti-bacterial properties to the material
The Energiser Poron / EVA top sock is from a combination of polyester and wool, with excellent perspiration absorbency, and bonded to a layer of EVA
The Poron inserts at the ball and heel of the top sock offer optimum support where it is needed most, ensuring dynamic impact compression and a gentle rebound with every step
The top sock responds to weight and temperature, moulding itself to the foot, resulting in fewer aches and pain
The top sock has been treated with *Ultra-Fresh to impart hygienic and anti-bacterial properties to the material
Top Sock
The in-sock is from an anti-static non-woven material that is bonded to a layer of EVA and contains Poron inserts at
the heel and ball of the foot for enhanced comfort and support
The Energiser Poron / EVA top sock is from a combination of polyester and wool, with excellent perspiration absorbency, and bonded to a layer of EVA
The Poron inserts at the ball and heel of the top sock offer optimum support where it is needed most, ensuring dynamic impact compression and a gentle rebound with every step
The top sock responds to weight and temperature, moulding itself to the foot, resulting in fewer aches and pain
The top sock has been treated with *Ultra-Fresh to impart hygienic and anti-bacterial properties to the material
The Energiser Poron / EVA top sock is from a combination of polyester and wool, with excellent perspiration absorbency, and bonded to a layer of EVA
The Poron inserts at the ball and heel of the top sock offer optimum support where it is needed most, ensuring dynamic impact compression and a gentle rebound with every step
The top sock responds to weight and temperature, moulding itself to the foot, resulting in fewer aches and pain
The top sock has been treated with *Ultra-Fresh to impart hygienic and anti-bacterial properties to the material
Midsole
Engineered with a cushioned EVA insert at the heel for shock absorption
Shank reinforcement for additional arch support
Shank reinforcement for additional arch support
Toe Cap
Steel toe cap – extra-wide fitting
Can withstand an impact load of 200 joules
If required, the boot can be manufactured without a steel toe cap (walnut only) – 20513
Can withstand an impact load of 200 joules
If required, the boot can be manufactured without a steel toe cap (walnut only) – 20513
Sole
The sole is from Double Density PU/PU
The midsole is from a low density flexible Polyurethane with a shore hardness of 0.45mm – 0.5mm
The outer sole is from Polyurethane with a shore hardness of 0.64mm – 0.65mm
The shoe is engineered with an EVA insert at the heel for shock absorption
A shank reinforcement is moulded into the midsole for additional arch support
The boot can withstand temperatures up to 95˚C
The boot is anti-static
The midsole is from a low density flexible Polyurethane with a shore hardness of 0.45mm – 0.5mm
The outer sole is from Polyurethane with a shore hardness of 0.64mm – 0.65mm
The shoe is engineered with an EVA insert at the heel for shock absorption
A shank reinforcement is moulded into the midsole for additional arch support
The boot can withstand temperatures up to 95˚C
The boot is anti-static
The Hiker boot has been tested to comply with SANS/ISO 20345 specifications and carries the SANS/ISO 20345 certified mark. This product is manufactured at Beier Safety Footwear, a division of BBF Safety Group (Pty) Ltd; which is an ISO 9001:2000 accredited factory.